Repainting the bach: picking a weather window
Every bach owner knows the feeling: it is a warm Saturday, the brushes are in the shed and the weatherboards are looking a bit sorry for themselves. The temptation is to start straight away. But a repaint is a bet on the next few days of weather, and in Auckland the weather does not always honour its side of the deal.
What Auckland's climate actually offers
NIWA, now part of Earth Sciences New Zealand, describes Auckland as subtropical, with warm, humid summers and relatively mild winters. Rainfall is typically plentiful all year round, with sporadic very heavy falls, and dry spells in summer are usually not long-lived. Most parts of the region get around 2000 hours of bright sunshine a year.
That description is a fair warning. There is no season in which rain cannot arrive, and the summer dry spells that make painting look easy tend to be short. A plan that depends on one perfect fortnight is a fragile plan. A plan that allows for a few days of slack is much sturdier.
Preparation takes longer than painting
Most of the time in a good repaint is spent before the paint tin is opened. Consumer NZ's advice for cracked or flaking paint is to sand or scrape off the existing coating and prime bare cladding before repainting. It also says flaking can be a sign of rot or moisture, in which case the cause has to be fixed first and any rotten timber or cladding replaced.
This matters for scheduling. Preparation can happen on days that are not good for painting, as long as the surfaces stay dry once primed. A realistic bach job might look like this:
- A week or two of dry-ish days for washing, scraping, sanding and repairs.
- Priming of bare timber and spot repairs as soon as surfaces are dry.
- Top coats on the days when the forecast and the walls agree.
Washing is the first step. BRANZ recommends a gentle wash of timber cladding at least annually, particularly under eaves and overhangs, because it removes marine salts and other contaminants. Consumer NZ adds that dirt and salt build-up can shorten the life of cladding, so salt left on the surface is a poor foundation for new paint.
Reading the day, not just the forecast
A forecast tells you about rain. It does not tell you everything about a good painting day, so it helps to think in terms of the wall itself:
Is the surface dry? Paint over a damp board and the moisture has nowhere to go. After rain, give weatherboards time to dry through, not just on the surface. On the shady side of a bach, that can take much longer than on the sunny side.
What does the paint label say? BRANZ says that all cladding products from reputable manufacturers come with care, handling and finishing instructions, and that following them is paramount. Paint is no different. The data sheet or the label will state the temperature and humidity limits for application, and the time needed between coats. Those limits trump any rule of thumb, including this article's.
How much sun is the wall getting? Consumer NZ notes that north and west walls take more damaging UV than south walls, which makes them the sides that most need a sound coating, and the sides that sit in strong afternoon sun. It can help to work around the house with the shade, and to keep to the label's limits on heat. That is common sense rather than a rule.
What happens at the end of the day? Paint needs time to set before the weather turns, so finishing a wall early rather than late gives you more margin. The label's recoat and rain-free times will tell you how much you need.
The coating system matters as much as the timing
A good day does not rescue a thin coat. BRANZ says that premium acrylic top coats are recommended for timber weatherboards, and that failing to reach the manufacturer's minimum dry film thickness may lead to premature weathering and early repaints. For homes by the beach, it adds that sand and salt spray may call for additional coats and maintenance to hold the appearance.
So when you are working out the timing, work out the number of coats too. A system that needs primer, two top coats and drying time in between needs more good days than one that does not. If the bach is exposed, it is a sound idea to plan for the heavier option.
If you are pricing the work with a painter, ask them how they decide when to start and what they do when the forecast changes. A short conversation about the right weather for exterior painting will tell you whether the schedule has any give in it.
Fit the paint to the bach calendar
A holiday home has a complication a family home does not: bookings, owner holidays and the Christmas to Waitangi crush. That changes what a good window looks like.
- Spring (before the school holidays): often a sensible time to start. The place can be opened up, washed and prepared, and the rhythm of painting does not clash with guests.
- Late summer and early autumn: can work if the bach has a quiet stretch after the peak, though Auckland's summer dry spells are short-lived, so build in spare days.
- Winter: painting may be possible on the odd good day, but surfaces take longer to dry, and a bach that is closed up needs ventilating anyway.
Whatever you choose, do not let the guest calendar force you into painting in poor conditions. Blocking out an extra weekend is cheaper than repainting a wall that has failed within a year.
Check the work before you leave
When the last coat is on, do a short walk-round. Look for drips, thin patches, missed edges and sections where the paint has not covered the end grain of cut boards. Keep the leftover paint, the colour name and a record of what was used. Consumer NZ recommends keeping a file of the materials used on a house, which makes maintenance much easier later.
If the preparation or the colour scheme looks daunting, a local painting firm such as Eggshell & Co is an example of the kind of business that can talk through timing, coating systems and access, and it never hurts to get more than one view on a job that is meant to last a decade.
A good repaint is patient: wait for the dry spell, prepare properly, and let each coat do its job.